The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

cojnit · 06-21-2004, 01:02 PM

I would also start looking for one of the original 2nd row seats that was out of a three row suburban, it will allow you to get to the third row easier.

I also looked into the same harware set-up problem you are having and came up with a couple of thoughts.

1. try to cut out the original hardware from the O.E. vehicle, and then mount that to the floor, or cut those stands off of the seat and weld ne hardware to the bottom out of an older style van.

06-21-2004, 01:02 PM	#3
cojnit Nothing clever Join Date: Jun 2003 Location: Kailua HI Posts: 828	I would also start looking for one of the original 2nd row seats that was out of a three row suburban, it will allow you to get to the third row easier. I also looked into the same harware set-up problem you are having and came up with a couple of thoughts. 1. try to cut out the original hardware from the O.E. vehicle, and then mount that to the floor, or cut those stands off of the seat and weld ne hardware to the bottom out of an older style van. __________________ Got "the Midas Touch!"