Re: c30 factory rear sway bar end links
Quote:
Originally Posted by mike in mo
this truck was a basket case when i got it and the guy that took it apart didn't keep any of the old parts so i have the spring plate bar mounts the bushing brackets and the bar it self. i cant find a end link kit to order and have no old parts to go by to know how long the spacers and bolts in the end link need to be.
|
I'll look through my dually parts. I should have the end links & can get you a length.
Beyond that, it's just the bolt that goes through the sleeve & the bushings/washers @ each end. I always upgrade to Energy Suspension pieces there as well as up-size the bolt (they're usually 5/16 so I step up to 3/8). Worst case, you can always go shorter or longer on the sleeve. I usually trim them shorter to allow the bar to do it's job sooner but my stuff is always getting lowered.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|