Quote:
Originally Posted by LockDoc
-
I just go by hole size. The small one is 3/4" and the large one is 1". Easiest way is to drop the steering box down to get the rag joint in. If you try to pry the shaft up you are going to break something inside the column.
LockDoc
|
The hole size in the rag joint? I am wondering if I can get that precise with that measurement (3/4" vs 13/16") since they expand/contract. There are also a lot of different spline options depending on the year of the box which I don't know. How are the splines counted (mine has 32 plus the keyway, does this mean it is a 36 spline...have read that somewhere).
Thanks about dropping the box, that is going to add a ton of time but at least I know it is necessary. The Brothers video just shows them dropping the column but that dang thing will not moved even unbolted with the weight of a pry bar on it.