Quote:
Originally Posted by Markuli
So my current throwout bearing can be used, that's good to know. I think this is just more of a lack of basic general clutch knowledge on my end, but will my throwout bearing pose an issue if there's an extra 3/8" it needs to travel, since the trans will be 3/8" further from the clutch fingers?
|
That won't make any difference.The clutch fork pivot ball is mounted to the bell housing and the throwout bearing sits in the yoke of the clutch fork, so the location of the transmission will have no bearing on the distance of the throwout bearing from the pressure plate or how far it travels.
LockDoc