The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Dead Parrot · 04-11-2020, 12:42 PM

It is fairly easy to replace the column dimmer switch with a floor mount version. As mentioned above, the 84 dimmer is at the base of the column. The connector kept the same pattern as the floor dimmer but as the wires are too short, you will have to splice and extend. I did this on a CUCV as the column dimmer switch was shot and I wanted the dimmer location/function to match my 75.

This doesn't solve the lever question but does move one function out of the mix.

04-11-2020, 12:42 PM	#8
Dead Parrot Registered User Join Date: Aug 2012 Location: Oklahoma City, OK Posts: 2,501	Re: Replacement Turn Signal Lever It is fairly easy to replace the column dimmer switch with a floor mount version. As mentioned above, the 84 dimmer is at the base of the column. The connector kept the same pattern as the floor dimmer but as the wires are too short, you will have to splice and extend. I did this on a CUCV as the column dimmer switch was shot and I wanted the dimmer location/function to match my 75. This doesn't solve the lever question but does move one function out of the mix.