The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**slammed57** · 05-10-2020, 04:28 PM

Stripped the rear fenders over the weekend. I did so with a strip it disc, I was curious why the passenger side came out so different than the driver side, So I went over to the SPI forum. One said that he runs into that when a panel has very thin old paint on it (which this fender did) Iam guessin then sun bakes the oxidation in through out the years. I even hit some areas with a 80 grit disc with no change. I was told to blast it, SO I did and it came out great. Now time to get them in some SPI epoxy, I love that stuff!!

05-10-2020, 04:28 PM	#265
slammed57 Senior Member Join Date: Jan 2015 Location: pembroke pines, fl Posts: 698	Re: slammed 57 Stripped the rear fenders over the weekend. I did so with a strip it disc, I was curious why the passenger side came out so different than the driver side, So I went over to the SPI forum. One said that he runs into that when a panel has very thin old paint on it (which this fender did) Iam guessin then sun bakes the oxidation in through out the years. I even hit some areas with a 80 grit disc with no change. I was told to blast it, SO I did and it came out great. Now time to get them in some SPI epoxy, I love that stuff!! Attached Images __________________ My 57 current build http://67-72chevytrucks.com/vboard/s...d.php?t=662590 Last edited by slammed57; 05-11-2020 at 09:35 AM.