The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 47-55.1 Parking Brake Control Rod Return Spring

FatherandSon · 05-14-2020, 11:53 PM

Thanks Bimus! If you could get a picture of and measure the release rod and see if it is straight end to end or has a 90 degree bend at the bottom end I would really appreciate it! The assembly manual depicts a lock bar with a 90 degree twist at the top end connecting to a release rod with a 90 degree bend. My parking brake lock bar is flat end to end with a hole at the top end, so I expect it remains straight and threads through the hole and the spring to as washer and nut.

05-14-2020, 11:53 PM	#4
FatherandSon Registered User Join Date: Mar 2013 Location: Riverside, CA Posts: 56	Re: Parking Brake Control Rod Return Spring Thanks Bimus! If you could get a picture of and measure the release rod and see if it is straight end to end or has a 90 degree bend at the bottom end I would really appreciate it! The assembly manual depicts a lock bar with a 90 degree twist at the top end connecting to a release rod with a 90 degree bend. My parking brake lock bar is flat end to end with a hole at the top end, so I expect it remains straight and threads through the hole and the spring to as washer and nut.