Quote:
Originally Posted by forestb
from what I can tell by the dirt marks on the front shock rods they have not fully compressed. But that might just be because at times the cups that hold the upper coils contact the bump stop brackets on the lower control arms. I am going to trim them this weekend for clearance.
|
So now you've swapped your percentages. If bump-stops are limiting clearance to less than </=2", you definitely need attention there.
Our trucks look great low. Problem is, once you go so far the ride quality is impacted unless other things (like your bump-stop dilemma) are corrected. It takes a lot of work to sort through everything sometimes. Many won't put forth the effort/investment & just 'live w/it'.