Quote:
Originally Posted by norcalcap
Im using AAC harness as well. Did a complete rewire....My HL's activate with key off.
About your brake lights coming on with your HL's, are you sure they are your brake lights and not just your taillights? When they are on, and you activate the brake, what happens? Brighter lights or no change? If it is truly your brake lights, then maybe they are simply reversed at the tailight socket or wherever you spliced them together. I did that by accident with my rewire. Just swapped the 2 wires and it worked.
|
See if this is correct
May not be
I have 3 brown wires labeled “park lights”.
Do i have it correct or do all 3 wires get tied together??
And slot does it go into?
I do see now i ran the double brown to front parking lights then split side to side
The single brown i ran to the rear lights
If i reverse these at the light switch would this correct my issue
When you look at the AAC diagram i just noticed they have tail light lead and the park light lead reversed in order when u follow the diagram
I will swap these tomorrow and see
Side note. On the hi/li beam switch i still dont see what went wrong; suggestions on this;