So getting around to tackle this .........
Whats everyones/anyones thoughts on routing ?
I made a little block jig thing to support the wires ...... and I think it will have to be routed sort of like im holding it with a big eye bolt or two holing in place on frame rail.
The drivers side goes right under the rear leafs ......
The passenger side goes around the diff to the other side.
The eye bolts would hold in place together and also allow me to move away from leafs a few inches.
thoughts ?
Block that supports the two rear lines and will be pulled from middle. Just mocked up ... it will have more support and be straight.
Where the plastic coupler tying the two is - I would put a heavy duty eye bolt or heim or similar to hold and keep away from leaf spring.