Re: 1989 Suburban 2WD 3/4 to 1/2 Swap?
Quote:
Originally Posted by lolife99
The other option would be to put a 1/2-ton ballpoint in the 3/4-ton UPPER a-arm.
You can’t do that with the lower a-arm because the 3/4-ton ballpoint hole is larger than the 1/2-ton version.
I would still not swap the crossmember itself.
|
Yep.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|