daughter had the car so no welding wire yet, ok, work on blower.
doesnt line up with the original hole but still plenty of room for the 4" pipe.
I flipped the cut piece to fill the old hole.
blower is quite a bit bigger, but still fits, crookedly haha.
trimmed for the battery box too, plenty of room! the trans lines line up, there is room under it for the lower rad hose, and the ac lines go behind and around it.
my daughter showed up at this point so we ran to get the welding wire and the 3/4 tube for the rad mount and some other odds and ends.
more coming!