We pulled the cab back off the frame so that we could keep going on the body work. During that time we made the decision that we were going to install a Vintage Air A/C system so we could smooth out the firewall a bit.
Cab back on jig:
Hole plates welded:
Rough body work on firewall:
Rough body work on rear of cab, also filled in filler neck:
Final body work done on bottom of cab - no more holes!:
__________________
1969 K10 LWB - 383/SM465/T221/4.56 - 8" of lift and 40" tires -
the broski's truck aka JackdTruck
1974 C30 Crew Cab Dually -
No Eng/No Trans/Bagged sometime in the 1990s and will be worked on sometime in the 2020s
... And a whole gaggle of other projects.
Check out what I'm up to on Instagram:
@zohmbii