The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Doing rust repair--someone post this pic, please

zac · 07-20-2020, 05:23 PM

If you can get a couple pics from underneath that would be much appreciated. I only said 4x4 because it’s easier to get under. There’s no hurry, I’m still struggling with the extended outer floor/inner rocker patch for the 3rd door. The only thing available is for a pickup cab, and it’s not a good fit and has to be heavily modified.

What I’m interested in from underneath is the area between the wheel well and the back part of the third door inner rocker where it ties into the rear door pillar. Also, theres the two piece bracket that goes onto the end of the crossmember just under the front of the plywood. It has two bolts that go into the inner quarter panel, and then two more that go into the back portion of the inner rocker. It’s hard to explain but makes more sense if you’re looking at it. I appreciate all your help.

07-20-2020, 05:23 PM	#5
zac Registered User Join Date: Jul 2008 Location: louisville, ky Posts: 502	Re: Doing rust repair--someone post this pic, please If you can get a couple pics from underneath that would be much appreciated. I only said 4x4 because it’s easier to get under. There’s no hurry, I’m still struggling with the extended outer floor/inner rocker patch for the 3rd door. The only thing available is for a pickup cab, and it’s not a good fit and has to be heavily modified. What I’m interested in from underneath is the area between the wheel well and the back part of the third door inner rocker where it ties into the rear door pillar. Also, theres the two piece bracket that goes onto the end of the crossmember just under the front of the plywood. It has two bolts that go into the inner quarter panel, and then two more that go into the back portion of the inner rocker. It’s hard to explain but makes more sense if you’re looking at it. I appreciate all your help.