Quote:
Originally Posted by 57tailgater
On your front bumper feedback: I intend on flipping my stock one upside down but the top of it needs to be level with that body line. Can't do it with just flipping the stock brackets as it would sit too low and look goofy. When getting it up high enough you would have to angle the end of the frame back for clearance for the "new" bottom portion. Chip Foose put 1st gen Camaro bumpers on his "Z10" both front and rear. Those are thin and V shaped - check it out.
|
The Camaro bumpers Foose is using with the front roll pan is what I am thinking. Thanks for the idea!