The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - HVAC Blend Door issues. Control head or actuators?

Xavier · 08-01-2020, 07:24 PM

I've tried the controller reset via pulling the battery/fuse and I've tried it with a shop grade scan tool via the software actuator calibration. Neither worked, they run through the calibration and then just peg out to one side.

Is there a way to find out what P/N actuators are supposed to be in which location? The truck came with a couple extra actuators but I don’t know which ones were pulled and replaced with what.

I have actuators with the following part numbers: 3BIH-19E616-JA 00031691A (WOORY), 3BIH-19E616-FA 000031741A (WOORY), 52402588 C3432164Ap (CEI), 16163982 M3331483B (CEI).

08-01-2020, 07:24 PM	#4
Xavier Registered User Join Date: Aug 2018 Location: Coatesville, PA Posts: 52	Re: HVAC Blend Door issues. Control head or actuators? I've tried the controller reset via pulling the battery/fuse and I've tried it with a shop grade scan tool via the software actuator calibration. Neither worked, they run through the calibration and then just peg out to one side. Is there a way to find out what P/N actuators are supposed to be in which location? The truck came with a couple extra actuators but I don’t know which ones were pulled and replaced with what. I have actuators with the following part numbers: 3BIH-19E616-JA 00031691A (WOORY), 3BIH-19E616-FA 000031741A (WOORY), 52402588 C3432164Ap (CEI), 16163982 M3331483B (CEI).