Quote:
Originally Posted by kwmech
Cannot really go for what is "ideal'' or what factory settings are. Too many manufacturers in the world with different machines grinding these things out. If you open the backlash a few thou it may fall into place
|
Here is the latest pattern as of five minutes ago. Depth is the same as before. Backlash is now at 006, that's closest I can get it to the 7-9 with the shims I have. My previous backlash was at 011, not the 004 I had told you before. So I tightened from 011 to 006 since the last link
Edit - I can do either 011 or 006 on the backlash. I figured tighter would be better. The previous pic link was at 011, the link below is 006
https://imgur.com/gallery/ynk6abR