Re: Skidmore '67 C20
Nice truck!
From the pics, it looks like you will need, at the very least, inner and outer rocker panels as well as kick panels and most likely the patch panel for the door pillars.
These repairs are not too difficult, but are a bit time consuming. A lot of good information on this board, just do a little research, gather all the parts and materials first, and have fun. I just did this on my truck this past spring when Covid first hit, I had a few weeks off at the time before being called back to work.
Looking forward to seeing your progress. I would also add, that if you have any slop in your door hinges, rebuild them first, this will help you later when aligning your sheet metal.
__________________
72 C10, Was a 350,M20, Brodix heads,Comp cam, Edelbrock intake&carb, Hedman hedders LWB.
Project is now a 5.3(L33) w/PRC stage 2.5 CNC ported 243heads, BTR RedHot cam,Holley Terminator X, T56 magnum. SWB, Boyd tank. 4.5/4 Drop http://67-72chevytrucks.com/vboard/s...My72c10project
|