Re: Jeep Trailblazer SS
I made a lot of progress on the roof rack. I pie cut the ends and cut about 1/2 inch off the center mounts. The driver's side is welded already. I bought enough square tubing to put a cross brace between the picture cross braces, but I'm thinking 4 bars should be plenty. They're about 2 feet apart. I imagine anything smaller would probably just be put inside instead of on top.
I mounted the new fog lights and was tinkering with the idea of dressing up the grille. Watching iron resurrection on tv, they had a black Nova and the grille had 2 shiny bars in the grille and i believe a little trim ring around the headlight. I thought I'd steal that idea for the turn signal detail instead of just being a plain black egg crate grille. The picture is just a quick attempt to see what it would look like before committing to sanding and repainting everything. I like it because it's different. I'll see if i can find some silver pinstripe tape instead of masking and painting everything.
-Josh
__________________
1967 Buick Special wagon
1968 Jeep Wagoneer
1958 Chevy Panel Truck
2017 Suzuki M109R
|