|
LS3 and tr6060 on way, what else?
I have a full liftout of an ls3/tr6060 coming.
Truck is a 70 c10 swb with 250.
A few questions about install:
-I know I will need a shifter relocator for the 6060. Is there one that is the standard for c10 swaps or one that worked well for your application? I need to know where to find one.
-What motor mounts will I need to go from the 250 to 6.2?
-where can I find a slip yoke conversion?
-Is there any other trans stuff Ill need (cross members/mounts/linkages?)
-Is there anything else I will need for the install?
A few questions about 'before install':
Engine has 88K. I want only bare bones (no AC, no PS).
-Is their a pulley kit I will need to get rid of AC/PS?
-Do I need to replace the pan?
-I will replace the oil pump. Is there a better brand?
-Any radiator recommendations?
-With 88K is there anything else I should do to the motor?
Thanks for any advice or info! Poop just got real for this project.
~JH
|