Re: Mounts not lining up.
I had the same issue when I had to swap in a new 350 crate.
I removed the perch mounts and used a Step Drill bit to expand the holes in both the bottom perch hole and the motor mount hole.
With all the bolts loosened on the perch mount, this gave me a little extra room to find the motor mount hole nice and square. Tightened motor mount bolts first - then tightened the rest of the perch bolts.
Used extra thick/oversized washer/lock washers where holes were modified, too.
Hope this helps.
__________________
64 C10 Custom
70 C10 Stepside w/67 Front End Clip
1970 Buick Ragtop
2003 Anniversary Road King Classic
|