Quote:
Originally Posted by LS short box
I used a Speedway Engineering splined sway bar on my 67 Nova project. As said above not cheap but worked very well. They asked questions about the cars weight overall. Front end weight. Frame rail width. Before I bought the actual splined bar I bought their mounts and tube along with their arms. Then I used a scrap piece round stock to mock everything to get correct width for the splined shaft. Worked for me.
|
This is a possibility as I have the basic dimensions. But, the need to bend their arms to align things is a concern.
I'm also still considering getting the
Speedway Motors A-body kit for the parts/pieces as the math suggests their 'arms' would possibly work (= easier for me).
Since I know that kit is too wide as is, I thought about narrowing their bar to size/re-splining (
if possible) or just get another bar from
Speedway Engineering in the dimensions needed.
I'll admit I'm hesitant on the Speedway
Motors just because there isn't much info/specs concerning the specific parts other than some basic dimensions.
Plan is to check their return policy before making any decisions