[44boggers]

Time for an update, got a handful of pictures.

In the last few months i was able to finish up all of the metal work on the doors and got the gaps down to 3/16" all around as well as to the fender/door.

I also added some weld to the top of the fender where it meets the cab

After that I did a couple skim coats of filler to the door, blocked it out with 80, expoxied and then shot it with slick sand, blocked that out with 80, 1 more shot of slick sand, blocked it with 180, shot it with 2 coats of epoxy to seal it up and now it is in high build primer.

I will post pics of this first and then move onto my slight dilemma.