Re: Blazer Floor Pans
Also modified the new floor crossmember over the transfer case.
Photos below:
1). First photo shows interference with TC, holding floor up;
2). 2nd and 3rd photo shows floor crossmember at TC modifications for clearance , basicly cut crossmember to shorten its profile to match original, rewelded. The highlighted yellow area in third photo was cut out;
3). 4th photo shows crossmember with modification completed; and
4). 5th photos shows crossmember before modification.
Let me know if more detail is helpful
Last edited by aotte1; 10-06-2020 at 12:28 AM.
|