Re: Por 15
I used POR-15, for the first, on my sandblasted frame just to make sure it didn't rust. I used a brush to spread it on. Since POR-15 breaks down if exposed to UV light I sprayed on some gloss black paint. After all that was done I wanted to run a ground wire to the frame. The only way I could get to clean metal was to use a die grinder with 80 grit.
So that is my experience with POR. If you prep the surface right it works great.
__________________
--------------------------------------------------------
1967 C10 "Snowball" (Currently in a million pieces down from a bazillion)
1989 Toyota DLX pickup "The Hulk"
2012 Jeep JKU "Crush"
1976 Chevy short bed with a 327 and 3 on the tree (Sold it to buy the Blazer)
1971 Chevy Blazer (Sold it)
|