Exhausting Stuff
You guessed it. I have finally fitted the exhaust.
Listen to it here
The driver side goes up between the gbox and break booster, over the x-member and down again to a joiner. There are also 3, yes 3 heat sheilds, 1 for he g-box wiring, 1 for the booster, 1 for the master. The joins will allow me to remove the front section for some heat treating after x-mas.
The passenger side is similar but doesnt have to clear anything so was way easier.
Both sides are 3" and have a h-pipe join before a pair of 3" Flowmaster delta 55's.
On the output side of things it is a simple 3" down turn just inside the rear guard atm but I plan to go out through the guard shortly.