View Single Post
Old 12-07-2020, 09:59 PM   #1
Rustbuster
Registered User
 
Join Date: Jun 2017
Location: Sanford.NC
Posts: 12
WTB 67 C10 front fender patch panel

I need a patch panel for the passenger side front fender on my 67 C10 . The front upper corner above the headlight and along the front edge beside the headlight was crushed and had about an inch of bondo in it. I can use a section about 8 inches from the front edge and about 12 inches down from the top edge next to the hood. Or if somebody has a 67 or 68 fender that is damaged on the rear but has a good front section, I could use the front 22 inches . My inner brace is straight and solid.
Rustbuster is offline   Reply With Quote