|
Re: SkinnyG's '61 Apache
Quote:
Originally Posted by SkinnyG
Fascia board come in 8" or 12" width, but the 3/4" thick fascia boards I found didn't come in colours I wanted, and the colours I wanted were either 1/2" or 9/16" thick.
Fascia boards would have cost me $650CDN, whereas these deck boards were $240CDN, which is cheaper than buying white oak in raw planks (zero waste for the Trex).
To fit these boards meant having an extra skid strip.
|
Yep.... Sounds like what I learned. You can find one aspect you want @ the cost of another....
The 'better' widths didn't come with color options desired.
Color options limited width choices or thickness of the planks.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|