|
Re: camaro clip crooked?
I think you are on the right path to getting it right.
I am assuming that you aren't intending to have the truck real low as it is going to sit up fairly high compared to most lowered trucks with a Camaro or Chevelle clip. You can figure that the middle of the crossmember will be abut 6-1/2 or 7 inches off the shop floor with all the weight of the truck on stock Camaro or Chevelle springs.
This is supposed to be the blueprint with measurements for a 56 3100 frame. it might give you some stock reference measurements if you need them.
__________________
Founding member of the too many projects, too little time and money club.
My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
|