|
Re: ‘67 front inner bearing seal...
I miked the distance from the bearing race to the top of the hub - 0.33 in. Seal thickness - 0.5 in. I also had previously tapped the race out a bit, sprayed some brake cleaner between the race and the stops in the hub, blew it out with compressed air, then tapped the race back against the stops before I took the measurements.
__________________
"It is hard to search for a black cat in a dark room, particularly if it is not there. Especially if this cat is smart, brave, and polite." Sergei Shoigu, Russian Minister of Defense
|