The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

67 Burb · 01-15-2021, 02:47 AM

On my 51 Pontiac project, the front park lights are single contact sockets so I though I would use them as daytime running lights. But then I had to come up with a way to have front turn signals.

I found that my electronic flashers will flash a relay, so I bought some bright amber LED bulbs with the 1156 base and drew up a circuit to flash them.

You will need two relays, one for each side. The only weird thing is that the front signal / park lights will flash off when the rear signal flashes on. (But who sees the front and back at the same time?)

Here it is:

01-15-2021, 02:47 AM	#6
67 Burb Registered User Join Date: Dec 2011 Location: Brandon, Manitoba, Canada Posts: 546	Re: How to make a park light blink. On my 51 Pontiac project, the front park lights are single contact sockets so I though I would use them as daytime running lights. But then I had to come up with a way to have front turn signals. I found that my electronic flashers will flash a relay, so I bought some bright amber LED bulbs with the 1156 base and drew up a circuit to flash them. You will need two relays, one for each side. The only weird thing is that the front signal / park lights will flash off when the rear signal flashes on. (But who sees the front and back at the same time?) Here it is: Attached Images __________________ Bob 1967 2wd Burb, 350/TH350, 3.73 posi