Re: need crate motor advice
May
I will chime in here....
I have a std bore 880 350 roller block
and a set of Vortec GM heads part NR NAL-12691728 that need to be freshened up . That you can have for a little negotiation. you would need to pay attention to the max valve lift with these heads or get them upgraded for a little higher lift cam shaft (pretty common)
https://www.chevelles.com/threads/ea...e-lift.111051/
that would make a nice 383 for the street, using a stroker kit from skip white
or take a look at
https://www.ebay.com/itm/SBC-CHEVY-3...YAAOSw32lYsdfS
see what others say on here....
__________________
Mike
72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider.
421 SBC / TH350 3000RPM Stall
Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks
|