The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Hooker Blackheart 1967-72 C10 Truck LS/LT Swap System Info Thread

Marine15Z28 · 02-06-2021, 03:43 PM

Engine angle 3 degrees back, truck pan clears with just about 1/2”. Still hangs below crossmember about 1.75”. If you have stock height truck you shouldn’t have a problem. Of course the CTSV plan will clear. I still have about 3/4” of tunnel clearance with the 4l80e.

02-06-2021, 03:43 PM	#164
Marine15Z28 Registered User Join Date: Oct 2017 Location: Laredo, Texas Posts: 11	Re: Hooker Blackheart 1967-72 C10 Truck LS/LT Swap System Info Thread Engine angle 3 degrees back, truck pan clears with just about 1/2”. Still hangs below crossmember about 1.75”. If you have stock height truck you shouldn’t have a problem. Of course the CTSV plan will clear. I still have about 3/4” of tunnel clearance with the 4l80e. Attached Images