The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Nick_R_23 · 02-23-2021, 05:02 PM

For a TBI engine, do yourself a favor and throw a stock cam back in there. The ECU parameters are too picky, and the TBI chips are a toss up at best. Not worth the headache for something that won’t give you much extra power anyway. At most, the changeover to a Caprice TBI roller cam would be as far as I would go, provided the block has the provisions to do so.

02-23-2021, 05:02 PM	#10
Nick_R_23 Registered User Join Date: May 2016 Location: Willow, Alaska Posts: 856	Re: ID'ing a 350 Cam For a TBI engine, do yourself a favor and throw a stock cam back in there. The ECU parameters are too picky, and the TBI chips are a toss up at best. Not worth the headache for something that won’t give you much extra power anyway. At most, the changeover to a Caprice TBI roller cam would be as far as I would go, provided the block has the provisions to do so.