Quote:
Originally Posted by '63GENIII
Just cut a piece of thick black fiber gasket and clamped it on with the baseplate. Not very finished looking but functional.
The PCM is the one that came with the truck. Only ever heard it called the "black box" PCM. The original intent was to run the black box til it was broken in then re pin the connectors and run the 0411 PCM which supposedly allows better data logging.
Like this one skymangs. If you take the actuator off of the base, this is kinda what you'll end up with. Except this one looks way nicer!
|
so you’re saying that all the sensors are the same and all I have to do is repin to the o411 red/blue connecters. Do I need to have the PCM reprogrammed for stand alone operation?