The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**clay68c10** · 03-17-2021, 10:08 AM

Finally sitting down to update.
The battery mount is done. I made an arm to support the rear corner. Nothing fancy but it will work well.
The welded nut part came off the 07+ tray, the hole in the core support was already there, and all the mounting fasteners are the same 10mm head bolts. All the tray mounts have room for movement/alignment. Trying to keep it simple and serviceable.

03-17-2021, 10:08 AM	#174
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,905	Re: ClusterTruck; because that’s what it is Finally sitting down to update. The battery mount is done. I made an arm to support the rear corner. Nothing fancy but it will work well. The welded nut part came off the 07+ tray, the hole in the core support was already there, and all the mounting fasteners are the same 10mm head bolts. All the tray mounts have room for movement/alignment. Trying to keep it simple and serviceable. Attached Images __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ Last edited by clay68c10; 03-17-2021 at 10:16 AM.