Re: No start after working on power windows
Most of the fuses in the fuse block under the dash have no power. I looked under the hood at the firewall and I saw the fusible link has bare wire showing where it connects to a crimp connector and two other wires. It looks like there was some arcing going on there based on the charred insulation. (See pics.) The insulation on the fusible link looks cracked along it's length.
So, I think I should replace the fusible link. What gauge link do I need? Also, should I put both wires connected to it in one butt splice connector, or is there a two way connector for this application?
Thanks.
|