[Osker]

I braced the cab on the driver’s side. When the door was shut it lined up decently and I checked it against my C10 door gaps for reference.

Satisfied with the gap tolerances I shut the door, placed a clamp from the gas filler hole to the door to draw it in slightly more and the crawled inside and welded some square tubing across the door opening to keep it aligned. This was the first thing I welded on the truck.

I started with driver’s side kick panel and I think for my first attempt it at cutting and welding a body panel it came out decent.

Keep in mind I have not done this type of work before. I just wanted to learn and get some experience.