Re: 1967 step side build!
Some pics of the plumbing. I wanted the filler neck bucket to be removable. So what I did was make 3 tabs that I welded on the bucket. Then I welded 3 bolts onto the fender. Now I can remove the bucket to paint or whatever. I plan to make a gasket to seal bucket to the inside of the fender. I also welded a 90 degree fitting close to the top of the filler tube for a vent. I hope that works OK. Before I sent the frame out to powder coaters I welded a notch in the frame for fuel hose clearance.
|