[Jesse49chevy]

Flying out tomorrow on a family vacation for a week. So took advantage of the day and decided to put in a little work on the truck. Installed the door seals, you guys have seen all ive done on this truck. I swear snaking these rubber seals through the track was the hardest thing ive done thus far... the rubber strip lubricant helped, but being a one man show is hard.
It looked easy so started from the bottom up but as soon as I hit the first curve on top it came to a halt.. would not budge. So after several attempts, including trying to pry the strip into the channel, I decided to cut it in half and start from the top down. Installed the front and rear seperately and the added weatherstrip glue in the center splice to put the back together. Hopefully wind noise will not be an issue...