Re: 1964 C10 fleet side swb
Paint on column did not fully cure...
Stripped and primered/painted column again. Believe I know where I messed up at, did not follow the instructions on the paint well enough. Re-apply time was after 1 hr. or 48 hrs. after first application. I was applying coats on and off during that day about 3 hrs after first coat.
This time around I applied one coat and will sand and apply my second/third coats after a full 72 hrs of dry time and within the 1 hr window. Then I will let cure another full 5-7 days before I install it.
I have a collapsible intermediate shaft and the U joints coming along with the Lokar ACA-1800 shift linkage that ididit recommended. Hopefully I can get all this put in once the column paint is finished.
Then I either want to have front/rear glass installed (most likely) or drop truck of for transmission rebuild....bu that will probably be after glass. Once glass/transmission are done I can get carpet/seats/doors installed, brakes bled again and it should be just about ready for a road test.
I am ready to get this truck on the road, get all the kinks worked out to drive it daily and then start working on the comforts I will still want like A/C, Cruise, stereo....etc
__________________
1964 C10 Resto-mod
5.3L - L59
|