Re: It's my turn, 47 S10 build
Throttle hook up wasn't too bad but it did take some work. I wanted to be able to use a standard replacement 47 pedal inside for looks and simplicity and also run the standard steel rod under the hood for the same reason. I have ran them in the past right from the pedal to the bottom of the throttle arm at the carb as a push rod but it didn't line up as well as I wanted on this one. Instead I built a bell rank that bolts to the firewall and the throttle arm pivots on that. Used a universal 3/8" door bushing and pin set and tapped the pin for a 3/8 lock nut. Initially it seemed good but now that it's on I need to pull it and make the arm a little longer.
|