The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

seik5 · 08-15-2021, 05:18 PM

Maybe I should word this different. Let me try again. Since I believe I am stock back to the rear end. Smallblock engine, th350 tranny, and 205 transfer case. If I had a stock rear end, to my knowledge, which is limited, the drive connecting points would all be centered between the frame rails. Including the center of the pinion shaft on the rear diff? If it were say a 12 bolt? on the 14 bolt that I have. the pinion center looks to be about an inch out out of center of the Frame rails?

08-15-2021, 05:18 PM	#4
seik5 Registered User Join Date: Aug 2019 Location: Soda Springs, idaho Posts: 71	Re: 14 bolt center Pinion output centerline Maybe I should word this different. Let me try again. Since I believe I am stock back to the rear end. Smallblock engine, th350 tranny, and 205 transfer case. If I had a stock rear end, to my knowledge, which is limited, the drive connecting points would all be centered between the frame rails. Including the center of the pinion shaft on the rear diff? If it were say a 12 bolt? on the 14 bolt that I have. the pinion center looks to be about an inch out out of center of the Frame rails?