Quote:
Originally Posted by OKGMC4
another question...at the time it seemed like a good idea to run the wastegate to it's own tiny muffler instead of looping it back into the main exhaust but I'm wondering if the injection system will or won't like this? Will it screw up the AFR readings or will it be ok?
|
No problem looping back in since its all the same exhaust. I wouldnt run a muffler off it unless you are supporting it somehow.
Quote:
Originally Posted by OKGMC4
Anyone want to share their real world experience with crankcase venting / pvc system with their ls turbo? I’ve searched and there sure are a ton of ways to do this. I’ve seen huge lines from each valve cover to a breather tank and the pvc deleted, I’ve seen some try to use the stock pvc system with a check valve and a catch can, or some use the Mighty Mouse can with pvc built in. But I’ve also heard of people blowing smoke or pushing out dipsticks, etc. Just want to know what you guys have run successfully on the street. Thanks…Mike
|
I have the driver side PCV to a sealed catch can (cheap one off amazon) to the intake. The passenger side has a vent with a filter on it.
Prior to venting the otherside it would hiss on shut down so I knew I needed to vent it.
No problems with this set up. Cost me $20-30 bucks.