Re: Interior Door Handle and Window Crank Foam Rings
the foam on the handle/ crank shafts is there to reduce drafts coming thru the panel , The seal is 3/8 round rubber that when in place it collects and directs moisture from the inner door panel down to the 2 lower drains at the seal level back into the door to drain out , look at the seal channel and you'll see the 2 small drain holes . Most any auto interior shop should be able to help you ,
__________________
1967 Factory short bed - Old school
'71 - 350 / 4bolt / 487 heads / Edelbrock C3BX
Muncie M-22 4 speed / Hurst Comp plus
Factory 12 bolt posi 3.73 / 255-70-15
Smoothed firewall / Factory cowl induction
Power disc brakes / power steering / 3.5-5" drop
|