The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - guys using the holley 302-2 pan

ls1nova71 · 11-09-2021, 11:42 AM

I would cut the stock one down and see how the pan fits with it. If it clears everything then it shouldn't be a problem, only way to know for sure is to try it.

As for the dipstick, same deal. If it goes all the way in the pan, it will work. it will likely be too long, but you could fill the engine with the correct amount of oil and remark the stick.

11-09-2021, 11:42 AM	#3
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: guys using the holley 302-2 pan I would cut the stock one down and see how the pan fits with it. If it clears everything then it shouldn't be a problem, only way to know for sure is to try it. As for the dipstick, same deal. If it goes all the way in the pan, it will work. it will likely be too long, but you could fill the engine with the correct amount of oil and remark the stick. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html