|
Re: guys using the holley 302-2 pan
Quote:
Originally Posted by ls1nova71
I would cut the stock one down and see how the pan fits with it. If it clears everything then it shouldn't be a problem, only way to know for sure is to try it.
As for the dipstick, same deal. If it goes all the way in the pan, it will work. it will likely be too long, but you could fill the engine with the correct amount of oil and remark the stick.
|
ya I been watching a few videos and reading up on it. I wasn't sure why it was required for a new pan and dipstick. I was playing with it last night and noticed the stock pan does prevent the oil.pan to sit flush up front and it doesn't allow the pickup tube to sit all the way down. I'm guessing cutting off the front and ordering the ls3 dipstick will probably fix it
__________________
67 1/2 ton Suburban - Project DRGNWGN. Build thread 
-_--_--_ _________
_--_-_ -/____|__|__\__
,.,,,.,.,,.,|_O _______ O_]
|