|
Re: Need little bag over axle advice
Quote:
Originally Posted by kev2809
curious..what does flipping those brackets do? also, when you say get the front closer...are you saying flip the TA brackets and then check the angles of the axle brackets and go from there?
|
Quote:
Originally Posted by kev2809
ok I researched a little and seen that flipping those brackets brings my pinion angle back closer to stock..correct? so if those are flipped...it will turn the whole axle down which could straighten out the lower axle brackets I already have welded on....right?
|
Yes.
It will shift (rotate) the front mounting points higher which rotates the pinion up toward the bottom of the vehicle. You'll want to plan on things using the final angles. This is where the aftermarket multi-hole adjustable brackets would benefit you.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|