[77chris03]

ANYONE HAVE WHAT I DONT HAVE? AT THE BOTTOM OF THE LIST

Specs and current progress.
Engine 95% done waiting on DYNO run Race Engine Development built
2001 LQ4
.030 over diamond LS1 comp series pistons
Compstar 6.125 LS H beam rods
LS6 243 Heads
Stock LQ4 crank, balanced and polished.
Comp Cams 54-444-11
CamComp Cams 13702-KIT
Comp Cams 850-16
Comp Cams 26925TS-KIT .660 lift
Holley valley cover
Holley mid engine drive 20-185bk
GM F body pan and windage tray
Melling HV oil pump
TSP hidden valve covers with LS7 coils
Holley 300-132 intake
Holley sniper efi 550-510D
Speed Engineering Long tube Headers
Speed Engineering SBC to LS engine Plate
Energy suspension motor mounts
Stock GM starter and all GM sensors

Transmission 100% done
97 Camaro T56 Fully converted to LS
Tremec LS bellhousing
Tremec LS mid plate
Tremec LS input shaft
Carbon fiber Syncro rings
New Aftermarket 3, 4, 5, 6 and rev gears REM finished
Tremec 1/2, 3/4, 5/6 and reverse syncro assy.
New aftermarket countershaft REM finished
Billet keys and brass sliders
All new Timkin Bearings
SST Shifter relcation Kit
Energy Suspension Trans mount
McLeod slave cylinder
McLeod 75357 Clutch kit (LQ4 long crank kit)

Frame and suspension/brakes
1967 specific OEM short box frame (titled 1968)
QA1 front Coilover conversion kit
QA1 rear Coilover conversion kit
HPI customs frame brace
QA1 front and rear sway bars
Wilwood Dynalite rear disc brakes with e brake
Wilwood rear 10" flex brake lines
Wilwood Superlite front disc brakes
Wilwood ProSpindles 5x5 pattern

**1967/8 GM 12 bolt**
Moser 30.50" axles 5x5Detroit
Truetrac posi Richmond Gear excel ring and pinion 4:10 ratio
Moser 7111 dif cover Inline Tube full stainless brake line kit
Tanks Inc under bed fuel tank
Tanks Inc fuel pump

Body - Have these and at blaster
1968 titled CST air cab
1968 OEM stepside bed sides
OEM bed cross sills (missing thin center one)
67 OEM fenders (rough)
67 OEM specific hood
OEM rear cross brace
OEM hood to windshield cowl1967/8
OEM front grill shell

Have also
1967 specific buddy bucket seats with bracket
OEM CST door mirrors left and right
OEM CST door emblems
1968 OEM wiper arms

Body - Need and do not have

front inner fenders left and right
fender to core support brace x 2
front doors, left and right (might have a set coming from Arizona, clean and rust free)
front stepside bed panel
chevrolet stepside tailgate
67 specific stepside bed fenders
short stepside steps, left and right