View Single Post
Old 01-25-2022, 05:44 PM   #3
Accelo
Registered User
 
Accelo's Avatar
 
Join Date: Mar 2015
Location: washington
Posts: 2,178
Re: 70 Grille Surround removal?

Bumper also has to come off. Mark the Special screws for the hood latch. They are 12 point not hex like the rest. Should be returned to the same place.
There are 4 bolts on each side bracket where it attaches to the fender. They take a 1/2 socket.
Then two on top and two on the bottom of the center support. The lower one is smaller than the others.
Then a couple on the hood latch. Depending on how you take this apart, still attached to the center support or not.
Accessing the fender bolts is the most difficult. I would try a extension with a ball socket style wobble.

Last edited by Accelo; 01-25-2022 at 06:47 PM.
Accelo is offline   Reply With Quote